- 地址：
- 安國市南陽工業區
- 郵箱：
- 415130881@qq.com
- 電話：
- 18631165157
- 傳真：
- 0312-3427286
- 手機：
- 18631165157
1. 安裝前準備：在安裝多吸頭排污泵之前，需要對設備進行檢查，確保設備完好無損，各部件齊全。同時，還需要準備好所需的工具和材料，如螺絲刀、扳手、電鉆、螺栓等。
2. 選擇合適的安裝位置：多吸頭排污泵應安裝在通風良好、排水方便的地方，避免陽光直射和潮濕環境。同時，應確保泵體與地面的水平距離不小于30cm,以保證泵的正常運行。
3. 固定泵體：使用膨脹螺栓將泵體固定在地面上，注意不要損壞墻體或地面。在固定泵體時，應確保泵體的水平度。
4. 連接電纜：將電纜從電源處接到多吸頭排污泵的接線盒上，注意接線要牢固可靠。同時，還應設置接地線，以防止漏電事故的發生。
5. 連接管道：將多吸頭排污泵與管道連接，注意管道的密封性和耐壓性。在連接過程中，可以使用密封膠或螺栓進行固定。
6. 檢查密封性：在安裝完成后，應檢查多吸頭排污泵的密封性能，確保無泄漏現象。可以通過向管道內充水來檢查泵的密封性能。
7. 試運行：在完成以上步驟后，可以進行試運行。首先打開電源開關，然后打開水源閥門，觀察多吸頭排污泵的工作情況。如果發現異常現象，應及時停機檢查原因并排除故障。
8. 定期維護：多吸頭排污泵在使用過程中，應定期進行維護保養，包括清潔泵體、更換濾網、檢查電機等。這樣可以延長設備的使用壽命，保證其正常運行。
1. Preparation before installation: Before installing the multi suction sewage pump, it is necessary to inspect the equipment to ensure that it is intact and all components are complete. At the same time, it is also necessary to prepare the necessary tools and materials, such as screwdrivers, wrenches, electric drills, bolts, etc.
2. Choose a suitable installation location: The multi suction sewage pump should be installed in a well ventilated and convenient drainage area, avoiding direct sunlight and humid environments. At the same time, it should be ensured that the horizontal distance between the pump body and the ground is not less than 30cm to ensure the normal operation of the pump.
3. Fix the pump body: Use expansion bolts to fix the pump body on the ground, taking care not to damage the wall or ground. When fixing the pump body, ensure the levelness of the pump body.
4. Connection cable: Connect the cable from the power source to the junction box of the multi suction sewage pump, and ensure that the wiring is firm and reliable. At the same time, grounding wires should also be installed to prevent leakage accidents.
5. Connecting the pipeline: Connect the multi suction sewage pump to the pipeline, paying attention to the sealing and pressure resistance of the pipeline. During the connection process, sealant or bolts can be used for fixation.
6. Check the sealing performance: After installation, the sealing performance of the multi suction sewage pump should be checked to ensure no leakage. The sealing performance of the pump can be checked by filling the pipeline with water.
7. Trial operation: After completing the above steps, the trial operation can be carried out. Firstly, turn on the power switch, then open the water source valve and observe the operation of the multi suction sewage pump. If abnormal phenomena are found, the machine should be shut down in a timely manner to check the cause and eliminate the fault.
8. Regular maintenance: During the use of the multi suction sewage pump, regular maintenance should be carried out, including cleaning the pump body, replacing the filter screen, and inspecting the motor. This can extend the service life of the equipment and ensure its normal operation.
上一條：陶瓷渣漿泵使用工礦。
下一條：渣漿泵機械密封的維護
